Zephyr ARC Serie Instructions De Montage page 3

MOUNTING THE DUCT COVER
1. Unclip the top cover. Fig.1
2. Unscrew and remove the four clips on the hood
Fig. 2
3. Position the chimneys on the hood as described
in fi g.3 and fasten the parts using the (4) screws
provided.
4. Place correct size ducting for your installation (not
supplied) to the hood and secure to the blower
collar with aluminum duct tape. Fig. 4
5. Secure duct cover bracket to top of wall just below
the ceiling observing the distance shown in Fig.5,
and using (2) screws provided. See Fig.6
6. Extend top duct cover up and secure to the duct
cover bracket using (2) screws. See Fig. 7
- 3 -