Publicité
Les langues disponibles
Les langues disponibles
STEP 8.
STEP 9.
WEATHER GUARD
PRODUCT REFINISHING PROCEDURES
®
All WEATHER GUARD
products are finished with a polyester powder coating, and it is important to follow these
®
procedures to get proper adhesion. As Knaack LLC cannot control the finishing of the products, the warranty for
WEATHER GUARD
Products on paint is not applicable on refinished products.
®
1. Sand the surface to be painted with 180-200 grit sand paper to rough up the surface. This should be followed by wet
sanding with a 400 grit wet or dry paper.
2. Wipe down the sanded surface with ketone based thinner. This removes the dust and softens the powder coating for
better paint adhesion.
3. Wipe sanded area with a tack rag to remove loose dust and particles before painting.
NOTE: Do not use a lacquer
8
Publicité
