DeWalt XR LI-ION DCB090 Traduction De La Notice D'instructions Originale page 52

EN G LI S H
a. Battery pack
b. USB Charging battery adapter
c. USB charging port
d. Fuel gauge
e. Date code
INTENDED USE
The DCB090 USB charging battery adapter is equipped with two USB
Type A charging ports and is designed to charge or supply power to
USB compatible devices with the use of D
18 V lithium ion battery packs.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
This USB charging battery adapter is a professional tools.
DO NOT let children come into contact with the charger. Supervision is
required when inexperienced operators use this charger.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities,
or for lack of experience and/or for want of knowledge or skills
unless they are supervised by a person responsible for their safety.
Children should never be left alone to play with this product.
Electrical Safety
NOTE: The following electrical safety warnings refer to the battery pack
and charger, they do not apply to the USB charging battery adapter.
Always check that the battery pack voltage corresponds to the voltage
on the rating plate. Also make sure that the voltage of your charger
corresponds to that of your mains.
Your D WALT charger is double insulated in accordance with
E
EN 60335; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially
prepared cord available through the D
50
WALT 10.8 V, 14.4 and
E
WALT service organisation.
E