LG HN7413AG Mode D'emploi page 8

I M P O RTA N T S A F E T Y I N F O R M AT I O N
READ ALL INSTRUCTIONS BEFORE USE
HOW TO AVOID DAMAGE TO THE APPLIANCE
• Prior to using your cooktop for the first time,
apply the recommended cooktop cleaning
creme to the ceramic surface. Buff with a
non-abrasive cloth or pad. This will make
cleaning easier when soiled from cooking.
The special cooktop cleaning cream leaves
a protective finish on the glass to help prevent
scratches and abrasions.
• Do not use the cooktop as a worksurface or
storage space.
• Please be careful at the edges when moving
pots and pans around.
• Do not have the cooking zones on with empty
pans, or with no pots or pans on them.
• Ceramic glass is very tough, and impervious
to sharp temperature changes but is not
unbreakable. It can be damaged if particularly
hard or sharp objects fall onto it.
DISPOSAL OF OLD APPLIANCES
To protect the environment, it is important that
worn-out appliances are disposed of in the
correct manner.
• The appliance must not be disposed of with
household rubbish.
• You can obtain information about collection
dates or public refuse disposal sites from
your local health council or environmental
health office.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
8
SAVE THESE INSTRUCTIONS
• Be very cautious if using pots made of cast
iron, or other pots with rough edges or burrs.
Moving these can cause scratches on glass.
• If sugar or a mixture containing sugar falls onto
a hot cooking zone and melts, remove
immediately, while still hot. If left to cool down,
it may damage the surface when removed.
NOTE: There is a risk of burning yourself
when the glass scraper is used on a hot
cooking zone!
• Keep meltable objects or materials away from
the ceramic glass surface, for example, plastic
utensils, aluminum foil, or cooking wraps.
If any materials or foodstuffs melt on the
ceramic-glass surface, these should be
cleaned up immediately.
CAUTION
Before disposing of old appliances please
make them inoperable so they cannot be
a source of danger. To do this, have a
qualified person disconnect the appliance
from the house circuitry.