PSC SP Ace Guide De L'utilisateur page 181

All manuals and user guides at all-guides.com
I
NTERNATIONAL
The SP* ACE scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH
21CFR Subchapter J for Class IIa laser products. The SP* ACE is also certified as a Class I laser
product to the requirements of IEC 825:1990.
Class I and Class IIa products are not considered to be hazardous. The SP* ACE contains
internally a Visible Laser Diode (VLD) that emits a maximum of 0.348 milliwatts at a wavelength
of 670 nanometers. The scanner is designed so that there is no human access to harmful laser
light during normal operation, user maintenance or during prescribed service operations.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light.
CAUTION: Do not attempt to open or otherwise service any component in the optics cavity.
Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser
safety regulations. The optics system is a factory only repair item.
CAUTION: Use of optical instruments with the scanner will increase eye hazard. Optical
instruments include binoculars, microscopes and magnifying glasses. This does not include eye
glasses worn by the user.
SP* ACE opfylder de amerikanske krav stillet i "DHHS/CDRH 21CFR Subchapter J" for klasse IIA
(class IIa) laserprodukter. SP* ACE er også godkendt som et klasse I (class I) laserprodukt, der
opfylder kravene i IEC 825:1990.
Klass I (class I) og klasse IIa (class IIa) produkter anses for at være sikre. SP* ACE indeholder en
SynligLaser-Diode (SLD), der udsender maksimalt 0.348 mW ved en bølgelængde på 670 nm.
Scanneren er konstrueret, så der ikke er nogen mulighed for menneskelig kontakt med skadelige
niveauer af laserbestråling under normal brug, normal vedligeholdelse, eller atoriseret reparation.
ADVARSEL:
Dette produkt er af sikkerhedsmæssige grunde udstyret med en ledning med 3 ledere og en 3-
benet stikprop. Denne ledning bør altid bruges i forbindelse med en 3-bent jordforbundet
elektrisk stikkontakt for at undgå eledtrisk stød.
ADVARSEL:
Anvendelse af andre kontrolmetoder, justeringer m.m. end dem specificeret i denne vejledning
kan medføre eksponering til farlige niveauer af laserbestråling.
ADVARSEL:
Forsøg ikke at åbne eller reparere komponenter i det optiske hulrum. Uautoriseret åbning eller
reparation af komponenter i det optiske hulrum kan være en overtrædelse af
lasersikkerhedsregulativer. Det optiske system mø udelukkende repareres of PSC autoriserede
reparationscentre.
R44-1132
A
PPENDIX
C
AUTION
E
NGLISH
D
ANISH
A
S
TATEMENTS
177