König Electronic HAV-MCS30 Mode D'emploi page 6

CLOCK AND TIMER
When used for the first time, or if the mains plug has been removed, the clock display will
flash "AM 12:00" or "0:00"
1. In standby mode, press the SLEEP/12/24HR (38) button to change between the 12hour
or 24hour time format.
2. Hold the PROG/CLK ADJ button (6, 41) for approx 3 seconds. The
hour digits will flash in the display.
3. Press / / TUNING
37, 50) repeatedly to select the correct hour.
4. Press the PROG / CLK ADJ (6, 41) button again, the minutes will
flash in the display, then press / / TUNING
/ TUNING Buttons (20, 37, 50) repeatedly to select the correct
minute.
5. Press PROG / CLK ADJ (6, 41) again to complete setting the current
time.
TIMER ON and OFF setting (Automatically turn on and off the unit)
1. In standby mode, press the MODE (43) button on the remote control.
"TMR-ON" shows up in the display and a "
Hold the PROG / CLK ADJ (6, 41) button for approx 3 seconds, and
the hour digits will start flashing.
2. Press the / / TUNING
(20, 37, 50) repeatedly to set the desired hour.
For example "2:00"
3. Press the PROG / CLK ADJ (6, 41) button and the minute digit will
flash.
4. Press the / / TUNING
(20, 37, 50) repeatedly to set the desired minute.
For example "2:08"
5. Press the MODE (43) button again. "TMR-OFF" shows up in the
display and a " " will flash in the display.
6. Press the PROG / CLK ADJ (6, 41) button and the hour digits will
flash.
7. Press the / / TUNING
(20, 37, 50) repeatedly to set the desired hour. For example "4:00".
8. Press the PROG / CLK ADJ (6, 41) button again and the minute's
digit will flash.
9. Press the / / TUNING
repeatedly set to the desired minute. For example "4:08".
10. Press the MODE (43) button to return to the normal display indicating
the current time.
11. Press the TIMER (40) button until "
unit will automatically turn on and off at the set time.
12. Press the TIMER (40) button again (until "
or / / TUNING
" flashes in the display.
or / / TUNING
or / / TUNING
or / / TUNING
or / / TUNING
" shows up in the display. The
" disappears) to cancel the timer function.
6
Buttons (20,
and /
Buttons
Buttons
Buttons
buttons