König Electronic HAV-MCS30 Mode D'emploi page 5

Speaker connection
1. To insert the speaker cable, push down the terminal lever of the
RIGHT speaker terminal (27) and LEFT speaker terminal (28).
2. Please ensure the cables are connected into the speaker terminal
with the correct polarities. Connect the left speaker to the terminal
marked L and the right speaker to the terminal marked R.
Headphone connection
You can use headphones (not included) to listen in privacy. Insert the headphones 3.5mm
plug into the Phones Socket (12). Use corresponding adapters (specialist shops) if you
have different plugs. The speakers will cut off automatically when the headphones are
being used.
VIDEO OUTPUT connection
The video output from certain iPod
using the VIDEO OUT socket (24). The accompanying audio
signal can be output using the AUDIO OUT sockets (25).
A standard AV lead with yellow, red and white coloured plugs
(not supplied) can be used for this purpose. Please note that the
sockets on your TV must be configured to accept input rather
than output signals to enable this feature to work correctly.
AUX connection
1) Connect a 3.5mm stereo jack lead to the AUX IN socket (11)
and the other end to your preferred device.
2) Press the AUX button on the remote control (46) "AUX" will
show in the display.
3) Select the play function on the auxiliary device and the sound
output can then be heard over the audio system.
Mains connection
1. Unwind the AC power cord (29) completely.
2. Insert the plug into any convenient AC outlet.
3. As soon as the unit has been connected with the mains
voltage, parts of the unit are in operation due to the standby
function. Turn off the unit completely before pulling the mains
plug out of the AC outlet.
® s can be output to a TV
5
Red
Black
Red
AC Outlet
AC Plug