essentiel b ECHC 2300P Notice D'utilisation page 9

Installing the battery in the remote control
Pull out the battery compartment on the back of the remote control.
1.
Insert a CR2032 Lithium battery (included), matching the polarity (+/-).
2.
Close the battery compartment.
3.
If you do not use the appliance for a while, remove the battery from the remote
control.
USING THE REMOTE CONTROL
Point the remote control at the infrared sensor on the display screen so that the screen can
•
receive the information transmitted.
Make sure there are no obstacles between the remote control and the infrared sensor.
•
Tilt the remote control at an angle of approximately 30° to the display screen.
•
use
Control panel and remote control description
The buttons on the remote control have the same functions as those on the control panel.
16
V.6.0
installation
Switching on the appliance / putting it on standby
Selecting the heating power
Selecting Fahrenheit (°F) or Celsius (°C)
Activating/deactivating the "Turbo" function
Increasing the temperature
Decreasing the temperature
Setting the timer
Plugging in and switching on the appliance
Plug the appliance into an easily accessible wall socket: a beep sounds if the "0/I"
1.
switch is already on.
Set the "0/I" switch to position "I" (power on) to turn the appliance on. A beep sounds,
2.
the room temperature and default temperature setting (25°C) appear on screen.
Press the button to program the appliance. The display lights up on the control panel.
3.
Press the button again to put the appliance on standby.
4.
Selecting the temperature unit
By default, the screen displays the temperature in degrees Celsius.
Press the button to select the temperature display in degrees Fahrenheit.
1.
Press this button again to select the display in degrees Celsius.
2.
Selecting the heating power
Press the button repeatedly to select the heating power. This heating power appears
on screen.
1000W: low heating power,
•
1300 W: medium heating power,
•
2300 W: high heating power,
•
(frost protection): the appliance ventilates cold air and the power varies to maintain a
•
room temperature of 5°C. When room temperature is 5°C or higher, the appliance runs on
1000 W power. When the temperature is 4°C, the appliance runs on 1300 W power. When
room temperature is less than or equal to 3°C, the appliance runs on 2300 W power. When
the temperature is 6°C or higher, the appliance stops running.
17
V.6.0
use