Publicité
Les langues disponibles
Les langues disponibles
2.2 Extraction
Switch extraction on and off
Switch extraction on and off
Switch on
Press the control key
.
The three LEDs above the symbols flash 1x.
Switch off with 10 minute delay
The LEDs on the remote control must first be
off.
Press the control key
once.
The lighting switches to ambience mode and
the first, white fan speed LED on the extraction
hood flashes. For recirculation, the motor
continues running for 30 minutes. For exhaust,
the motor continues running for 10 minutes.
After this time, the motor will switch off. The
lighting will remain on in the mood mode.
Switch off without delay
The LEDs on the remote control must first be
off.
Press the control key
twice. Be careful, do
not tap.
Use the 30 minutes run-out time to make sure that the monoblock
filter can properly absorb the cooking smells.
Auto-Stop
To avoid that the hood will function during a too long period,
it will switch off automatically after 3 hours (when no changes
to the controls have been made). Only the motor will turn off
automatically. The lighting will remain on in the mood mode
Fan speed
Fan speed
Regulate the fan speed
Select control key
.
This means the speed can be adjusted
Increase speed
Select control key
Decrease speed
Select control key
The fan speed can be set to 4 speeds. You can select the
required position depending on the vapour production while
cooking.
A self-rectifying thermal contact makes sure that the
motor is switched off when overheated. The mo tor
will switch on again after is has cooled down. The
cause of the overheating needs to be determined.
This may be, for example, that the contents of the
pan have caught fire, the motor fan is blocked or an
object is (partly) closing off the exhaust opening.
2.3 Lighting
With respect to the lighting you can choose between the cooking
mode and the mood mode.
Cooking mode
The cooking mode provides optimum lighting for cooking. This
mode has by default a maximum light intensity.
Lighting - cooking mode
Switching cooking mode on
Select control key
The LED above the symbol lights up.
Confirm cooking mode
Briefly press the control key
For confirmation, you can see the LED above
the symbol flashing quickly for a short period.
The cooking mode is then fully activated and
the following functions can be changed..
Switch cooking mode on and off
Switching cooking lighting fully on and off can
be achieved by briefly pressing the
control key.
Mood mode light intensity
The brightness of the lights in cooking mode
can be increased or decreased using the
and
buttons; by holding these down, the
brightness will change.
Change the colour temperature in the
mood mode
The colour temperature can be adjusted from
cool to warm using the
keys. Holding the keys down will adjust the
colour temperature. Release when the desired
colour temperature has been reached.
– 15 –
.
or
or
> control
Publicité
