Publicité
Les langues disponibles
Les langues disponibles
LED DISPLAY
at Plant Mode
at Human Mode
MAIN MENU FUNCTIONS
The Main Menu (8) functions can be toggled through by using MENU. If the main menu is not brought
up, the green bar will remain blank, leaving the UP and DOWN buttons to toggle between parameters
and Zoom Levels, respectively.
Pressing MENU once will bring up the main menu, with an underlining flashing bar indicating the
current choice.
To select the function, press ENTER when it is underlined by the flashing bar. Note that after 1 minute
if nothing is pressed, the Main Menu will disappear and the device will revert to the normal state.
HOLD HOME
Hold ENTER for 3 seconds to reset the unit back to Home Setting which has a default target zone of
800-1200 PPM. The Target Zone is the only setting that will be reverted back to Home Setting. All
other settings will not be reset. If the unit is unplugged it will keep the plant setting previously selected
before power was removed.
On the next page is a table showing what main menu selection is made by pressing MENU multiple
times as well as their functions. Note that the device will display "Done," followed by the confirmed
selection if selected correctly.
INSTRUCTIONS
ALARM PLANT LOG CALI ALTI 0C/0F ADV
Note: LOW LED never turns ON in
Human Mode
5
Publicité
