Publicité
Les langues disponibles
Les langues disponibles
BM 2610615924 2/02
SPEED DRYING PARTS
Parts and other materials can be speed dried
by waving the heated air stream over the
work until dried.
STRETCHING, SHAPING AND
INSTALLING VINYL
Direct hot air stream at vinyl section and
wave heat gun in a back and forth motion.
Stretch and shape until wrinkles are
removed. DO NOT aim at glass.
2/1/02
12:36 PM
Page 9
-9-
DEFROSTING FROZEN COILS OR PIPES
Direct hot air stream at frozen part and wave
back and forth until part is defrosted or
thawed.
LOOSENING NUTS AND BOLTS
Direct hot air stream at nut or bolt to be
loosened for a short period of time. Heating
the nut or bolt will cause the metal to
expand. Remove the air stream from work
piece. Loosen nut or bolt with proper wrench.
Publicité
