Philips FC9179 Mode D'emploi page 11

Masquer les pouces Voir aussi pour FC9179:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 64
-
Use minimum suction power to vacuum curtains, tablecloths etc.
On remote control (specific types only)
1
During vacuuming, you can adjust the suction power level with the – and + buttons on the
remote control.
-
Use maximum suction power to vacuum very dirty carpets and hard floors (Fig. 35).
-
Use minimum suction power to vacuum curtains, tablecloths etc (Fig. 36).
pausing during use
1
If you want to stop vacuum cleaning for a moment, press the standby button on the remote
control to switch off the appliance temporarily (specific types only) (Fig. 37).
If your appliance has no remote control, press the on/off button on top of the appliance to switch
off the appliance.
2
Insert the ridge on the nozzle into the parking slot to park the tube in a convenient
position (Fig. 38).
3
To ensure stable parking of the telescopic tube, adjust the tube to the shortest length.
4
To continue vacuum cleaning, simply press the standby button on the remote control again
(specific types only).
If your appliance has no remote control, press the on/off button on top of the appliance to switch
on the appliance.
storage
1
Switch off the appliance and remove the mains plug from the wall socket.
2
Press the cord rewind button to rewind the mains cord (Fig. 39).
3
Put the appliance in upright position. To attach the nozzle to the appliance, insert the ridge on
the nozzle into the storage slot (Fig. 40).
-
To ensure stable parking of the telescopic tube, adjust the tube to the shortest length.
4
Specific types only: Always put the Tri-Active nozzle in the carpet setting when you store it.
Also prevent the side brushes from becoming bent (Fig. 28).
Replacing/emptying the dustbag
Always unplug the appliance before you replace the disposable dustbag or empty the reusable
dustbag.
replacing the disposable dustbag
-
Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the floor (Fig. 41).
1
Pull the cover upwards to open it (Fig. 42).
2
Lift the dustbag holder out of the appliance (Fig. 43).
Make sure you hold the dustbag upright when you lift it out of the appliance.
3
Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 44).
When you do this, the dustbag is sealed automatically.
,
4
Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as
far as possible. (Fig. 45)
5
Put the dustbag holder back into the vacuum cleaner (Fig. 43).
English
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fc9178Fc9178/01Fc9178/03

Table des Matières