ressort
spring
contre-écrou
counternut
1306215 arming spring, black cplt
distance of 27 yards to 54,7 yards
1306215 ressort arm, noir cplt
distance de 25m à 50m
1304850 arming spring, green cplt
distance of 54,7 yards to 76,5 yards
1304850 ressort arm, vert cplt
distance de 50m à 70m
SPRING ASSEMBLY
ASSEMBLAGE RESSORT
Insert the threaded eye bolt into the front of the spring by turning
the throwing arm, tighten the spring by hand.
Amener le tirant à œil dans l'extremité avant du ressort en faisant
pivoter le bras de lancement.Visser le ressort à la main.
tirant à œil
threaded eye bolt
Tighten the spring (with the help of a crank (spanner) for example) bearing
in mind that the tighter the screw, the speed of the clay is increased
Once the correct tension has been obtained, tighten the locknut
Visser le ressort (à l'aide d'une manivelle par exemple) étant entendu
que plus le ressort sera tendu, plus la force donc la vitesse du
plateau sera élevée.
Une fois la position obtenue, bloquer le contre-écrou à l'avant.
The silent rubber block should be tightened without being compressed
Le silentbloc doit être parfaitement serré sans être trop comprimé.
Adjust the tension of the spring by tightening the
nut at the back of the machine.
Régler la tension du ressort en actionnant l'écrou (ou la molette)
à l'arrière de la machine.
The coils on the arming spring should never touch when the
spring is at minimum tension .
This could cause the frame to break!!!!
Les spires du ressort d'armement ne doivent jamais
êtres jointives lorsque le ressort est détendu au minimum.
cela pourrait causer la rupture du corps principal !!!!
1304845 arming spring, gray cplt
distance of 71 yards to 92 yards
1304845 ressort arm, gris cplt
distance de 65m à 85m
1304605 arming spring, red cplt
distance of 87,5 yards to 120 yards
1304605 ressort arm, rouge cplt
distance de 80m à 110m
CHAP 3 PAGE 9