STERWINS ELM1-33P.4 Notice De Montage - Utilisation - Entretien page 229

FR
SAFETY INSTRUCTIONS
ES
·On machines with multi blade, take care as rotating one blade
PT
can cause other blades to rotate.
·Be careful during adjustment of the machine to prevent
IT
entrapment of the fingers between moving blades and fixed
parts of the machine.
EL
·For rotary mowers, ensure that only replacement cutting
systems of the right type are used.
PL
·Replace worn or damaged parts for safety. Use only genuine
RU
replacement parts and accessories.
·When servicing the blades be aware that, even though the
KZ
power source is switched off, the blades can still be moved.
·The extension cable, plug and socket must be watertight and
UA
intended for outdoor use.
·Always allow the machine to cool down before storing
RO
·The machine should be supplied via a residual current device
EN
(RCD) with a tripping current of not more than 30 mA.
Caution: An inadequate extension cable can be dangerous and
can cause accidents. Please contact a qualified electrician for
advice if in any doubt.
Even if you are operating this product in accordance with the
provisions, residual risks will still remain. The following dangers
can arise in connection with the structure and design of this
product:
·Health defects resulting from vibration emissions if the
product is used over longer period of time or not adequately
managed and properly maintained.
·Injuries and damage to property to due to broken accessories
or hidden objects that are suddenly dashed.
·Burns if hot surfaces are touched.
228 228