Spector&Co SPECTECH T154 Mode D'emploi page 2

DIAGRAM A – T154 Product Map
No. Description
1 Integrated 2in1 iOS/Android plug
2 1x LED light
3 Micro-USB input port
To Re-charge T154
1. Insert the micro USB output of the charging cable into the T154 & connect USB output to a certified
wall adapter (not included).
2. A red LED will flash while charging. A solid red LED indicates the T154 is fully charged.
NOTE: the LED lights also act as a battery status indicator.
Power Indicator
LED flashes once per 1 second interval
LED flashes twice per 1 second interval
LED flashes 3 times per 1 second interval
LED flashes 4 times per 1 second interval
To charge electronic devices using the T154
1. Insert the integrated 2in1 Android/IOS cable into your electronic device as follows:
a. To charge IOS devices: the IOS plug must be facing down
b. To charge Android devices: the micro-USB output of T154 must be aligned with the micro-USB
output of electronic device when inserted together (see Diagram B below)
NOTE: the T154 will automatically power ON once the integrated 2in1 Android/IOS plug is inserted into a
smartphone for charging
Power Percentage
<25%
25-50%
50-75%
75-100%