Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Please read and follow all instructions & safety precautions detailed below prior to using this product. Failure to
do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the product
from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change, etc.),
discontinue use immediately.
Avoid cleaning this product using chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate it)
This product is not a toy: KEEP AWAY FROM CHILDREN
Do not re-charge via USB port on a computer
Do not leave this product unattended while it is in use or while it is being charged
It is recommended to fully recharge this item prior to initial use
When not being used for prolonged periods of time, please recharge this product every 3 months to avoid
damaging the battery
Wireless charging is most efficient when smartphone is placed directly over the wireless charging dock
located at the back of the product
It is recommended to remove smartphone from cases with credit card holders as wireless charging may
demagnetize credit cards
It is recommended to remove smartphone from heavy & thick cases, or from multi-functional cases (ex:
credit card holder cases or cases with magnetic feature) when recharging your device as these may disrupt
wireless charging capability
The T1042 is a 4,000 mAh powerbank with wireless charging capability.
specifications & user guide.
T1042 Specifications
1. FCC ID: 2ARPF-T1042
2. Battery Type: UL Certified Lithium Polymer rechargeable battery
3. Battery Duration/Lifespan (Charge/Discharge): 500 times
4. Battery Capacity: 4,000 mAh
5. Power Input: DC 5V
6. Power Output: DC 5V
7. Current Input: 2A (micro-USB)
8. Current Output:
WARNING
Safety Precautions
T1042 USER MANUAL
Please see below product

Publicité

loading

Sommaire des Matières pour Spector&Co SPECTECH T1042

  • Page 1 WARNING Please read and follow all instructions & safety precautions detailed below prior to using this product. Failure to do so may result in serious personal injury and / or property damage. Safety Precautions • Do not expose this product to heat sources (including open flame or direct sunlight) •...
  • Page 2 a. USB: 1x 1A & 1x 2A (2A max if one USB port is in use) b. Wireless: 1A 9. Product Size: 2 9/16” x 4 ¾” x 5/8” 10. Net Weight: 139g 11. Re-charge Time: 3 hours 12. Included in the box: •...
  • Page 3 NOTE: To verify remaining battery power, press power button: 4 blue LED indicates 100 – 75% battery power remaining 3 blue LED indicates 75 – 50% battery power remaining 2 blue LED indicates 50 – 25% battery power remaining 1 blue LED indicates 25 – 0% battery power remaining To charge electronic devices using the T1042 a) Via T1042 wireless charging area: ** Make sure your device has integrated wireless charging capability or is equipped with wireless charging...
  • Page 4 AVERTISSEMENT S'il vous plaît lire et suivre toutes les instructions et consignes de sécurité indiquées ci-dessous avant d'utiliser ce produit. De ne pas prendre ces précautions pourrait entraîner des blessures graves et/ou des dommages matériels. Précautions de sécurité • Ne pas exposer le produit à des sources de chaleur (incluant les flammes nues ou la lumière directe de soleil).
  • Page 5 6. Puissance de sortie : 5V CC 7. Courant d’entrée : 2A (micro-USB) 8. Courant de sortie : a. USB : 1x 1A et 1x 2A (2A max avec un port USB en usage) b. Sans fil : 1A 9. Dimensions du produit : 2 9/16po x 4 ¾po x 5/8po 10.
  • Page 6 Rechargement du T1042 1. Insérer la sortie micro-USB du câble de chargement (incluse) dans le T1042 et connecter la sortie USB à un adaptateur de prise de courant murale (non inclus). 2. LED bleue clignotera en succession pour signaler que le T1042 est en cours de chargement (les 4 LED seront fixes lorsque le T1042 est complètement chargé...
  • Page 7 Mise en garde : Toute transformation ou modification non expressément autorisée par l'autorité responsable pourraient annuler le droit de l'utilisateur à utiliser l'équipement.
  • Page 8 ADVERTENCIA Por favor, lea y siga todas las instrucciones y precauciones de seguridad que se detallan a continuación antes de utilizar este producto. El no hacerlo puede traer como consecuencia lesiones personales graves y/o daños materiales. Precauciones de seguridad • No exponer el producto a fuentes de calor (incluyendo las llamas abiertas y la luz directa del sol).
  • Page 9 6. Potencia de salida: 5V CC 7. Corriente de entrada: 2A (micro-USB) 8. Corriente de salida: a. USB: 1x 1A et 1x 2A (2A máx. con un puerto USB en uso) b. Inalámbrico: 1A 9. Dimensiones del producto: 2 9/16” x 4 ¾” x 5/8” 10.
  • Page 10 Recarga del T1042 1. Insertar la salida micro-USB del cable de carga (incluida) en el T1042 y conectar la salida USB a un adaptador de toma de corriente mural (no incluido). 2. LED azul parpadeará en orden para señalar que el T1042 está cargando (las 4 LED quedarán fijas cuando el T1042 esté...
  • Page 11 Toda transformación o modificación no autorizada explícitamente por la autoridad responsable podría anular el derecho a utilizar el equipo.