Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Please read and follow all of the instructions & safety precautions detailed below prior to using this product.
Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the
product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change,
etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate
it)
Do not leave this product unattended while it is in use or while it is being charged (at home or inside
the vehicle)
Do not leave this product unattended in a vehicle
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port certified wall adapter (not included)
Do not re-charge via USB port on a computer
Do not use this product while it is being charged
When not being used for prolonged periods of time please charge every 3 months to avoid damaging
the battery
Wireless charging is most efficient when smartphone is placed directly over the wireless charging icon
It is recommended to remove smartphone from cases with credit card holders as wireless charging
may demagnetize credit cards
It is recommended to remove smartphone from heavy & thick cases, or from multi-functional cases
(ex: credit card holder cases or cases with magnetic feature) when recharging your device as these
may disrupt wireless charging capability
The smart watch wireless charging feature is intended for iOS smart watches only & is not compatible
with other smart watch devices
The T1041 is a 5,000mAh powerbank which can wirelessly charge smart watch & smartphones with wirelessly
charging enabled capabilities. Please see below product specifications & user guide.
T1041 Specifications
1. Battery Type: Grade A Lithium Polymer rechargeable battery
2. Battery Duration/Lifespan: 500 times
3. Capacity: 5,000 mAh
WARNING
Safety Precautions
T1041 USER MANUAL

Publicité

loading

Sommaire des Matières pour Spector&Co SPECTECH T1041

  • Page 1 WARNING Please read and follow all of the instructions & safety precautions detailed below prior to using this product. Failure to do so may result in serious personal injury and / or property damage. Safety Precautions  Do not expose this product to heat sources (including open flame or direct sunlight) ...
  • Page 2 4. Power Input: a. DC 5V/2A (via Micro-USB) b. DC 5V/3A (via Type-C) 5. Power Output (USB): DC 5V/2.5A 6. Power Output (wireless): a. DC 5V/1A (smartphone) b. DC 5V/0.35A (smart watch) 7. Product Size: 2 11/16” x 5 5/16” x 5/8” 8.
  • Page 3 b) Via Type-C input port 1. Insert the Type-C output of the charging cable (not included) into the T1041 & connect USB output to a certified wall adapter (not included). 2. Blue LED will flash while charging. Solid blue LED indicates the T1041 is fully charged. NOTE: the LED lights also act as a battery status indicator.
  • Page 4 (2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 5 AVERTISSEMENT S'il vous plaît lire et suivre toutes les instructions et consignes de sécurité indiquées ci-dessous avant d'utiliser ce produit. De ne pas prendre ces précautions pourrait entraîner des blessures graves et/ou des dommages matériels. Précautions de sécurité  Ne pas exposer le produit à des sources de chaleur (incluant les flammes nues ou la lumière directe de soleil).
  • Page 6 1. Type de batterie : Batterie rechargeable en lithium polymère grade A 2. Durée/Vie utile : 500 fois 3. Capacité : 5,000 mAh 4. Puissance d’entrée : 5V/2A CC (micro-USB) 5V/3A CC (Type-C) 5. Puissance de sortie (USB) : 5V/2.5A CC 6.
  • Page 7 adaptateur de prise de courant murale (non inclus). 2. LED bleue clignotera pendant le chargement. LED bleue fixe signale que le T1041 est chargé. b) Port d’entrée type-C 1. Insérer la sortie de Type-C du câble de chargement (non incluse) dans le T1041 et connecter la sortie USB à...
  • Page 8 DÉCLARATION DE LA FCC Cet appareil est conforme au point 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) L’appareil ne devrait pas causer d’interférences nuisibles et (2) Ne devrait pas voir son fonctionnement altéré par des interférences nuisibles. Mise en garde : Toute transformation ou modification non expressément autorisée par l'autorité...
  • Page 9 ADVERTENCIA Por favor, lea y siga todas las instrucciones y precauciones de seguridad que se detallan a continuación antes de utilizar este producto. El no hacerlo puede traer como consecuencia lesiones personales graves y/o daños materiales. Precauciones de seguridad  No exponer el producto a fuentes de calor (incluyendo las llamas abiertas y la luz directa del sol).
  • Page 10 3. Capacidad: 5,000 mAh 4. Potencia de entrada: 5V/2A CC (micro-USB) 5V/3A CC (Type-C) 5. Potencia de salida (USB) : 5V/2.5A CC 6. Potencia de salida (inalámbrica) : a. 5V/1A CC (smartphone) b. 5V/0.35A CC (smart watch) 7. Dimensiones del producto: 2 11/16” x 5 5/16” x 5/8” 8.
  • Page 11 b) Puerto de entrada tipo-C 1. Insertar la salida tipo-C del cable de carga (no incluida) en el T1041 y conectar la salida USB a un adaptador de toma de corriente mural (non incluido). 2. LED azul parpadeará durante la carga. LED azul fija señala que el T1041 está cargado. NOTA: el visor LED señala.
  • Page 12 Este aparato cumple con la norma 15 del reglamento de la FCC. Su funcionamiento debe cumplir con las siguientes condiciones: (1) El aparato no debería causar interferencias perjudiciales y (2) Su funcionamiento no debería afectarse a causa de interferencias perjudiciales. Aviso: Toda transformación o modificación no autorizada explícitamente por la autoridad responsable podría anular el derecho a utilizar el equipo.