Berker 7531 40 07 Mode D'emploi page 16

GB
F
Slide the cap over the bus terminal with the bus line at the bottom
(fig. F) until it is heard to engage.
Remove the cap by pressing against the sides and by pulling it out
at the same time (fig. E).
Cap
G
Technical characteristics
General
instabus EIB supply voltage
instabus EIB power rating
instabus EIB Connection
Mains connection
GB
: 21 - 32 V DC
: typically 150 mW
: instabus connector
: screw terminals
1.5 – 4 mm² solid wire or
2 x 01.5 – 2.5 mm² solid wire
0.75 – 4 mm² stranded
without wire end ferrule or
0.5 – 2.5 mm² stranded
with wire end ferrule