Swing Setting - Danby DPA080CB7WDB Instructions

TEMP (°C / °F)
2
1
TEMP (°C / °F)
1
Dehumidifying Setting
Ensure the unit is plugged in and has power. The OPERATION
indicator on the display panel of the unit illuminates.
1. Press the MODE button until DRY mode is selected.
2. Press the
NOTE: You cannot set the temperature in dehumidifying mode.
3
The factory humidity preset is 60%.

Swing Setting

Use the
1. If the
the auto-swing feature of the louver is activated. The
horizontal louver will swing up/down automatically. Press
it again to stop.
NOTE: When the louver swings or moves to a position which
would affect the cooling ability of the air conditioner, it will
automatically change the swing/moving direction.
8
button to start dehumidifying mode.
button to adjust the Up/Down airfl ow direction.
button is held down for more than 2 seconds,