Axis Q60 Serie Guide D'installation page 18

Page 18
12. If connecting several media converter switches in a daisy chain, set the dip switch of each
outgoing network connector port that connects to another media converter switch to
position C. Leave the dip switch in its default position (position B) when connecting the port
directly to the network, see Media Converter Switch, on page 9 and the User Manual for more
information.
Dip switch (4x)
Always use the default dip switch setting (position B) if the system setup is not defined.
13. Attach the cover to the media converter switch.
14. Switch on the mains supply.
15. Make sure the LED indicators on the media converter switch indicate the correct conditions. For
information, see Media Converter Switch LED Indicators, on page 12.
AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
Power LED
Network LED (4x)
ETH 1/2/3/4
Camera LED