Brandson 303055 Mode D'emploi page 22

6 Centre-piece mounting screws
7 Washer for pedestal
8 Pedestal mounting screw
9 Rotor protection cage
10 Tilt angle - range adjustment screw
11 Tilt angle - screw
12 Pedestal
5 Installation
Take the device out of the package and remove all the packaging material.
Unscrew the "Tilt angle screw"(3, 11) and the "Tilt angle bolt" (4). Then loosen
the pedestal mounting screw (8) and the washer (7).
Take the centre bar and screw it to the pedestal.
22
English