Télécharger Imprimer la page

Remington BHT6256 Mode D'emploi page 6

Publicité

ENGLISH
BATTERY REMOVAL
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the
battery.
Remove the attachment head.
Using a small, flat screwdriver, pry off 2 springs from the top side.
Move/push 2 release buttons to the centre.
Push/pry the inner housing from the outer housing and expose the PCB and battery.
Pry the PCB assembly out of the inner housing.
Cut or break the wire stamps on both ends of the battery and remove the battery.
The battery is to be disposed of safely.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.

Publicité

loading