J.C. SCHWARZ JTS 225 Mode D'emploi page 101

Kickback will propel the tool in direction op-
posite to the wheel's movement at the point of
snagging.
d) Use special care when working corners,
sharp edges etc. Avoid bouncing and snag-
ging the accessory. Corners, sharp edges or
bouncing have a tendency to snag the rotating
accessory and cause loss of control or kick-
back.
e) Do not attach a saw chain woodcarving
blade or toothed saw blade. Such blades cre-
ate frequent kickback and loss of control.
SAFETY WARNINGS SPECIFIC FOR SANDING
OPERATIONS:
a) Do not use excessively oversized sanding
disc paper. Follow manufacturers recom-
mendations, when selecting sanding pa-
per. Larger sanding paper extending beyond
the sanding pad presents a laceration hazard
and may cause snagging, tearing of the disc or
kickback.
b) Use the machine only for dry sanding. Pen-
etration of water into the machine increases
the risk of an electric shock.
c) Pay attention that no persons are put at
risk through sparking. Remove any com-
bustible materials in the vicinity. Sparking
occurs when sanding metal materials.
d) Caution, fire hazard! Avoid overheating the
object being sanded as well as the sander.
In unfavourable conditions, e.g., when sparks
emit from sanding metals, sanding debris in
the dust bag, micro filter or paper sack (or in
the filter sack or filter of the vacuum cleaner)
can self-ignite. Particularly when mixed with
remainders of varnish, poly-urethane or other
chemical materials and when the sanding de-
bris is hot after long periods of working.
e) When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
f) Do not touch and/or inhale harmful/toxic
dust generated during sanding. All persons
in the vicinity of the work area must wear
appropriate personal protective equipment
for protection against harmful/toxic dusts.
Use the dust extraction facility and keep the
work area well ventilated.
g) Ensure that you have removed foreign objects
such as nails and screws from the drywall be-
fore commencing sanding.
h) Do not force sander, let the tool do the work
at a reasonable speed. Overloading will occur
if too much pressure is applied and the motor
slows resulting in inefficient sanding and pos-
sible damage to the sander motor.
i) Don't continue to use worn, torn or heavily
clogged sanding paper.
j) Don't touch the moving sanding paper.
ADDITIONAL SAFETY INSTRUCTIONS ON RISKS
DUE TO VIBRATION
a) The declared vibration data represents the
main applications of the tool, but different
uses of the tool or poor maintenance can
result in different vibration data. This may
significantly increase the vibration level over
the total working period.
b) Additional safety measure shall be taken to
protect the user from effects of vibration.
Maintain the tool and its accessories, keep
hands warm and organize work patterns and
periods.
MACHINE SPECIFIC SAFETY WARNINGS FOR
SANDERS
a) Use the machine only for dry sanding. Pen-
etration of water into the machine increases
the risk of an electric shock.
b) Pay attention that no persons are put at
risk through sparking. Remove any com-
bustible materials in the vicinity. Sparking
occurs when sanding metal materials.
c) Caution, fire hazard! Avoid overheating the
object being sanded as well as the sander.
Always empty the collection system before
taking breaks. In unfavourable conditions,
e.g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or
paper sack (or in the filter sack or filter of the
vacuum cleaner) can self-ignite. Particularly
when mixed with remainders of varnish, poly-
urethane or other chemical materials and when
EN 101