installation
EN
G
G.
Align the 2 holes located in the bottom
of the front left crossover log with the 2
studs on the left hand side of the burner.
I.
Place the top right log on the notches in
the bottom rear log and the front right log
pushing back against the rear panel.
K
K.
Place the notch in the front charcoal log
over the second grate post. Make sure
not to cover any ports.
6
W415-2746 / A / 11.04.19
H.
I
J.
L.
H
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
Align the hole and the pin in the right
crossover log with the pin in the top rear
log and the hole in the top right log.
L
Align the pin in the bottom of the middle
crossover with the hole in the middle of
the middle log resting it on the front left
crossover log.
J