D-Link DWR-720 Guide D'installation page 4

PRODUCT
HARDWARE SETUP
QUICK INSTALLATION
2
1. Remove the battery cover on the back of the device by sliding it
down, then remove the battery.
2. If you want to configure the DWR-720 wirelessly, take note of
the SSID (network name) and password on the label under the
battery, you will first need to connect to this SSID.
3. Insert the SIM card into the SIM card slot as shown, ensuring the
gold contacts are facing down.
4. Reinsert the battery and attach the battery cover.
Note: If you wish to use the onboard storage functionality, install a
microSD card at this time.
5. Connect the Micro USB end of the USB cable to the Micro USB
port on the bottom of the DWR-720 and plug the USB end into the
USB port of the power adapter or a PC to charge the battery. After
charging is complete, a standard USB cable can be used to power
your mobile devices while on the go.
6. Press and hold the power button for six seconds to turn on the
device.
DWR-720