SmartLab walk B Mode D'emploi page 32

Setting date:
After that, your device enters the date setting mode. Press the "M/" button to
enter the current day (display shows "D") and confirm with "Disp/ Set". Proceed
accordingly for setting the month (display shows "M") and year (display shows "Y").
Always confirm with "Disp/ Set".
Note: In order to use wireless data transfer, date and time need to be set correctly.
Otherwise, measured data can not be assigned accordingly.
BLE settings:
BLE is a wireless data transfer standard. In order to use it, transmitting- and receiving
device must be equipped with a specific module. Your smartLAB
® walk B step counter
has an integrated BLE module, making it possible to transfer measured data to a PC,
laptop,tablet or a mobile phone. You can store, analyse and process the data with the
accordant telemedicine software on these receiving devices.
You have 2 different BLE setting modes:
32