Displaying On A Different Monitor; Technical Characteristics; Technical Specifi Cations; Lcd Monitor - Extel O'PLUS Guide D'installation Et D'utilisation

6. DISPLAY ON A DIFFERENT MONITOR
(fi g. E)
IMPORTANT : When connecting to the peripheral, the monitor image is cut.
1. Power off the monitors
2. Connect both monitors using the supplied RCA/Jack cable
3. Connect the mini jack cable on the left side of the monitor, to the AV OUT output as well as the yellow (video)
and red & black (audio) RCA Jack . )
4. Power the monitors back on
5. As soon as the mini jack cable is connected to the left side of the monitor, the video switches off and moves to
the other monitor (TV for example).
If the image is bad, check that the video signal format is compatible with your additional screen.

7. TECHNICAL CHARACTERISTICS

a. Technical specifi cations:
- Radio frequency 2400 to 2483.5 MHz
- Range: 200 m in a free fi eld.
b. LCD Monitor
- Screen : 18cm diagonal (7'') TFT LCD
- Resolution: 640(H)x480(V) VGA 20fps
320(H)x240(V) QVGA 25fps
- Video format NTSC / PAL
- Compression format: MPEG-4
- Power supply: 12V
- Battery
- Consumption: 1000 mA.
- Channels: 4
- Composite video + audio output
- Dimensions: 200x118x19(mm)
- Operating temperature: approximately 0°C to + 50° C.
c. Camera
- Power supply: 5V
- Consumption: 1000 mA.
- Sensitivity to light: 0 lux
- Infrared LED: 20 infrared diodes.
- Camera objective: 1/4'' CMOS colour 6mm - 37°
- Resolution: 420TVL
- Video output 1 Vp-p / 75 Ohms
- S/N ratio: more than 48db
- IP 65
- Operating temperature: approximately -5°C to + 50° C.
- Dimensions: 90 x 58 x 58 (mm).
d. Option
- Extra camera: CAM PLUS (max. 3 extra cams)
CFI EXTEL O'PLUS - 10/2015 - V1
GB7