Napoleon BLKEX36 Guide Rapide page 2

Ember Bed
Lights
i. Spread an even layer of clear glass over the
ember bed lights, spreading the remaining
glass over the fi rebox fl oor. Accent the lights
with topaz glass (supplied). Optional: If
desired, place glowing embers along the
rear burner. This may take away from the
fl ame height.
2
2. Place log #2 in between the 2 burners. Ensure
the bottom locator rests against the left side of
the pilot shield.
NOTE: Place glowing embers on the front burner, in front of the large clusters of ports (see step i for placement
details). The burner has been designed to have large fl ames in these locations. If not, blue fl ames will be present.
Notch
4
4. Place the notch on the left end of log #4 on the
fi rst grate post. Ensure the opposite end rests
behind the second grate post.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
Ember Location
Bottom Bottom
Locator Locator
Pilot Shield Pilot Shield
1
3
1. Place the holes in log #1 on A1 and A2.
2
3. Place log #3 between the burners on the right
side of the fi rebox. Place the right end on the
fl oor of the fi rebox and place the locator on the
rear lighting tube (not illustrated).
4
5. Place the notch in log #5 on the fourth grate
post, resting the opposite end on the grate.
Ensure the third grate post is in between the
two stumps.
• 1(866)820-8686
1
A1 A1
A2 A2
1
3
Stumps
1
Notch
5
W415-2792 / 03.12.20
• www.napoleon.com