Huawei B618 LTE CPE Guide Rapide page 12

5. Establishing a WPS Connection
If the Wi-Fi device to be connected to the LTE CPE supports WPS, the wireless
network encryption key is generated automatically and there is no need to enter it
manually. The steps for WPS connection are as follows:
1. Turn on the CPE.
2. Turn on the Wi-Fi device to be connected to the LTE CPE.
3. Activate the LTE CPE's WPS.
Note:
Press and hold the WPS button for two to five seconds to set up a 2.4 GHz
WPS
connection, or press and hold the button for more than five seconds to set up a
5 GHz WPS connection.
4. Activate the Wi-Fi device's WPS.
Note:
For specific instructions for the Wi-Fi device, refer to the device's
user manual.
6. Downloading Huawei HiLink App
Scan the QR code to download the Huawei HiLink App and configure the router
from your phone.
10