Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
21
english
1. Safety information
1.1 General remarks
These installation and operating instructions contain items of
information of fundamental importance which must be taken
into account during assembly, operation and maintenance.
They should therefore be read carefully before installation and
setting up the pump by the fitter and also by the responsible
specialist staff/operator. They must always be available for
consultation at the plant's place of deployment.
Not only the general safety hints included in this «Safety Hints»
section are to be observed, but also the special items of safety
information included in the other sections.
1.2 Identification of notices
The safety information contained in these instal-
lation and operating instructions are specially
marked with the general danger symbol «Safety
sign according to DIN 4844-W9». The non-
compliance of it can lead to danger to people.
This symbol is a warning of dangerous electric
voltage.
«Safety sign according to DIN 4844-W8».
You will find this symbol beside the safety
Warning
information. The non-compliance of it can
endanger the machine and its functions.
Information signs mounted directly on the plant, such as, for
example
- arrow for direction of rotation
- symbols for fluid connections
must carefully be minded and be kept in a fully legible state.
1.3 Staff qualification and training
The staff deployed for assembly, operating, maintenance and
inspection tasks must have the appropriate qualifications for
such work. The scope of responsibility, competence and super-
vision of the staff must be controlled exactly by the operator.
1.4 Risks in the event of non-compliance
with the safety information
Non-compliance with the safety information can result in
the danger to persons and the plant and the environment.
Non-compliance with the safety information can lead to the loss
of claims for damages of any kind.
Publicité
Chapitres
Table des Matières
