Brandson Equipment 303282 Mode D'emploi page 8

3. Special safety instructions for this device
• Attention! Hot surface! Never touch hot surfaces with your hand. There is
a danger of burning due to the hot surfaces!
• Keep the device away from combustible and flammable materials!
• Never point the LEDs at people or animals. Do not look directly at LED
light!
• Never use the device without a protective glass or stand!
• Keep a distance of at least 0.5 m between the work light and
other objects!
•
• Any cracked protective cover (for more information, see hard-glass
dimensions under "2 Technical data") must be replaced!
• Suitable for indoor and outdoor use such as tunnel, alley, garden, etc.!
• Aluminum die-cast housing with safety glass: The surface is equipped
with an electrostatic coating. It is in accordance with IP65 waterproof and
dust-free!
• Only use and/or charge the product under supervision!
4. Start-up
Remove the device from its packaging and remove any packaging material. Please
fully charge the battery with the supplied power supply before the first use. The
power supply of the spotlight is located on the underside. Then connect the
power supply to a properly connected power outlet. After this, mount the base
to the LED work light and switch the device on or off with the ON/OFF switch on
the underside.
8
English