Olimpia splendid LIMPIA 4 Mode D'emploi Et D'entretien page 14

Always unplug the unit before servicing in any way.
• Inside the bowl. Pour excess water out of the unit. Wash the unit with fresh water, using a soft paintbrush and a
soft cloth as necessary.
Do not submerse the base of the unit into water, or allow water to enter inside the dry air exhaust port of
the unit.
• Water tank. Empty water tank. Clean the mist tube with fresh water and a light brush (a soft paintbrush is ad-
vised).
• Outer surface of the unit. Wipe the surface of the unit with a soft, damp cloth if needed. If you notice an accu-
mulation of water during usage, reduce humidity and dry outer surface with a cloth.
• Ultrasonic Transducer. If you use the hard water, distilled or tap water, you should clean the transducer weekly.
• Air filter. Remove the grid, clean the filter. Reinstall grid and filter.
• Purifier filter (if provided). Rinse with clean water and let it dry.
• Depending on usage and water type, cleaning to remove scale may be required
weekly or every other week to optimize unit performance.
• If you live in a hard water area, we recommend the use of distilled water or
soften water for your humidifier. This will help reduce the precipitation of
minerals or white dust.
• Do not clean the unit or water tank with detergents or cleaning chemicals of
any kind.
1. Unplug unit.
2.
Remove the tank and empty all water from unit bowl and tank.
5- CLEANING
5a- GENERAL CLEANING
5b- DESCALING
5c- ULTRASONIC DISK
Ultrasonic Disk
3. Locate the ultrasonic disk on the inside centre of
the base unit.
4. ONLY use a soft paintbrush to delicately clean
the disk and remove accumulations and deposits.
Do not scrub or scrape the ultrasonic
disk.
* Clean the disk with a soft paintbrush.No other
cleaning tool should be used.
ONLY A PAINTBRUSH.
EN - 5
LIMPIA 4