Custom Program - LG DLE5001W Mode D'emploi

CYCLE OPTION BUTTONS
To Install the Drying Rack
With the dryer door open, slide the rack into
1
the dryer drum.
2
Make sure it is seated evenly on the edge
of the inner door rim and resting flat on the
inside of the dryer.
NOTE: Be sure to remove the drying rack
after using the RACK DRY cycle.
32
(cont.)
NOTE: You may only save one custom program
at a time. Pressing and holding the CUSTOM
PROGRAM button will overwrite any previously
saved custom program.
*
1
2
3
4
To Recall a Custom Program:
1
2
3

CUSTOm PROGRAm

If you have a special
combination of settings that
you use frequently, you can
save these settings as a
CUSTOM PROGRAM.
To Save a Custom Program:
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
Use the cycle setting buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the option
you would like to add. A confirmation
message will be shown in the display.
Press and hold the CUSTOM PROGRAM
button for 3 seconds.
Turn on the dryer.
Press the CUSTOM PROGRAM button.
Press the START/PAUSE button to start
the cycle.