Klarstein BELLA PICO 2G Mode D'emploi page 16

EN
16
Disassembling the unit
1. Press the release lever and swing the drive arm upwards.
2. To remove an attachment, press it gently and unlock it by turning it counterclockwise
slightly.
3. Remove the attachment.
4. To remove the splash guard, pull it down. First pull the splash guard slightly
downwards on the back.
5. Unlock the mixing bowl by turning it slightly clockwise.
6. Remove the mixing bowl .
7. Press the release lever and swivel the drive arm downwards into the working
position.
Speed control, switching on and off
1 Switch on the unit by turning the speed governor to the right.
2. Start mixing at a slightly slower speed and then increase the speed.
Recommendations for speed levels
Level Attachment
1-3 All
Dough hook
Description
Before starting, install one of the hooks or clubs and the
splash guard.
Knead and mix solid dough or ingredients.
Ingredients:
• 0,5 kg flour
• 0.3 litre lukewarm water
Processing:
1. Place the ingredients in the bowl.
2. Fasten the splash guard and the dough hook.
3. Knead the dough for 15 seconds at level 1.
4. Knead the dough for 15 seconds at step 2.
5. Knead the dough for 3 minutes at step 3.