3 Assembly and Set-Up
1. Fasten the handlebar stem on the headset,
and put the kickstand down
3. Tighten the screws onto both sides of
the stem with the hexagon wrench
4
2. A ach the handlebar to the stem
4. A er the assembly, press the power
bu on to check if it's working properly
4 Charge Your Scooter
Li up the rubber flap
5 How To Ride
Wear helmets and knee pads in case of
falls and injuries when you learn to ride
the scooter
Plug the power
When charging is
adapter into the
completed, put back
charging port
the rubber flap
Turn on the scooter, and
1.
check the power indicator
5