Maintenance; Before Each Use; After Each Use - MSA 10175021-SP Manuel D'utilisation

5

Maintenance

WARNING!
Do not open the thermal imaging camera housing as there are no user serviceable parts inside. Only
authorized personnel may service the unit. FAILURE TO FOLLOW THE ABOVE WARNING CAN
RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The product should be regularly checked and serviced by trained personnel. A record must be kept of
the periodic inspection and maintenance. Always use original parts from MSA.
Repairs and maintenance must be carried out only by authorized MSA service centers.
Changes and modifications are not permitted and may result in voiding the approval and/or warranty.
MSA is liable only for maintenance and repairs carried out by MSA.
The SCBA must be stored in a dry, protected location between -40 °C and +70 °C (-40 °F and 158 °F).
5.1

Before Each Use

Each time the Integrated TIC is used a visual inspection must be performed following the criteria
below:
• Check for housing damage due to mechanical, chemical or thermal loads.
• Check for cracks and other damage to the display and Germanium window.
5.2

After Each Use

• Carefully clean the Germanium window on the front of the control module and the front display with
a lint-free, isopropyl alcohol wipe.
• Carefully dry using a soft, lint-free cloth. Avoid scratching the Germanium window and main
display.
NOTICE
Do not use any solvents or thinners to clean the camera as they may attack the camera housing mate-
rials. Do not use abrasive cleaners or cloths for cleaning the camera as these may also damage the
camera.
Integrated Thermal Imaging Camera
Maintenance
US
9