Hand-Arm Vibration; Safety And Instructional Decals - Toro 20835 Mode D'emploi

Hand-Arm Vibration

Measured vibration level for the left hand = 4.8 m/s
Measured vibration level for the right hand = 5.5 m/s
Uncertainty Value (K) = 2.2 m/s
The measured values were determined according to the
procedures outlined in EN ISO 5395:2013.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away from
moving parts.
1. Lock
1. Height-of-cut settings
2
112-8760
112-8867
2. Unlock
119–2283
CAUTION
Long-term exposure to vibration while operating
2
the machine may cause some numbness in the
2
hands and wrists.
Wear gloves that dampen the vibration whenever
you operate the machine for an extended period of
time.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts; keep all guards and
shields in place.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Thrown object hazard—keep bystanders a safe distance
from the machine; stop the engine before leaving the
operating position; pick up any debris before mowing.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not operate up and down slopes; operate side to
side on slopes; look behind you when backing up.
4
131–4514