F.F. Group SBDS 370 PLUS Notice Originale page 7

SBDS 370 PLUS
Keep the necessary safety distance from the tool,
f
while in operation.
Αvoid inappropriate work with the sander, danger
f
of injury. Never touch the running sanding belt,
danger of injury.
Check that the worktable is clean and that no resi-
f
dues exist around the working area, the tool or its
parts.
Make sure you hold with caution the working mate-
f
rial regardless of size, in order to avoid falling over
or injuring. In Boîtier of large items, use extra sup-
port and fastening.
Avoid sanding very small items; danger of injury.
f
Do not overload the worktable; always use one by
f
one item, from left to right.
Do not use worn, torn or heavily clogged sanding
f
belts. Damaged abrasives can be teared apart, be
thrown from the machine or injure somebody.
Safety comes first; always follow the safety instruc-
f
tions in order to avoid injury.
Before use, check that there is adequate lighting
f
around the working area, in order to support your
work.
Always switch the machine off from the power sup-
f
ply after use, otherwise there is danger of injury.
Keep a clearance of 2-3mm between the worktable
f
and the sanding belt or disc.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the
machine's rating plate are compatible with the
power supply you intend to connect it to.
This appliance is Class I* and is designed for con-
nection to a power supply matching that detailed
on the rating label and compatible with the plug
fitted.
figure1
If an extension lead is required, use an approved
and compatible lead rated for this appliance. Fol-
low all the instruction supplied with the extension
lead.
PRODUCT SPECIFICATIONS
INTENDED USE
The machine is intended for dry sanding–with
high removal capacity–of wood, plastic, metal,
filler as well as varnished surfaces.
TECHNICAL DATA
Article number
Model
Rated power input
Rated power
No-load speed
No-load belt speed m/min
Sanding belt length
Sanding belt width
Sanding belt tilt
Sanding disc
diameter
Sanding disc speed
Sanding table
dimensions (LxW)
Sanding table tilt
Weight
Sound emission values determined according
to EN 62841-1
Typically the A-weighted noise levels of the product
are:
Sound pressure
level
Sound power level
Uncertainty K
IDENTIFICATION
Work
Support
Belt
Tension
Lever
Mitre
Sanding Disc
Gauge
Work table
1. Sanding Belt
2. Belt Tracking Control Knob
3. On/Off Switch
4. Sanding Disc
5. Worktable
6. Mitre Gauge
7. Belt Tension Lever
8. Work Support
English |
45 526
SBDS 370 PLUS
V 230
Hz 50
W 370
min 2.980
-1
441
mm 915
mm 100
0~90°
mm 150
min 2.980
-1
mm 226x160
0~45°
kg 16,50
dB(A) 82,20
dB(A) 89,40
dB 3
Sanding Belt
Belt Tracking
Control Knob
On/Off Switch
www.ffgroup-tools.com
7