Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Rigging
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
The device can be installed on the ground or on the wall or ceiling.
Hanging installation
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
DANGER OF FIRE!
17/42
(1) Power switch
(2) Power supply
(3) Fuseholder
(4) DMX-512 OUT
(5) DMX-512 IN
(6) DC OUT
(7) Microphone
(8) Sensitivity control
00026151.DOC, Version 2.2
Publicité
Table des Matières
