Description Of The Device; Features - EuroLite FF-4 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables lying around. You endanger your own and the safety of

others!

Before filling the device disconnect from mains. Never fill in any hot liquids.

Only use high-quality, water-based smoke fluid recommended by the manufacturer. Other smoke fluids may

cause clogging.

Always make sure there is sufficient smoke fluid in the fluid tank. Operating this smoke-machine without

smoke fluid will cause damage to the pump as well as over-heating of the heater.

Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

- - -m

The symbol

determines the minimum distance from lighted objects. The minimum distance

between light-output and the illuminated surface must be more than 0.5 meter.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the

fixture.

Always fix the fixture with an appropriate safety-rope.

The maximum ambient temperature t

= 45° C must never be exceeded.

Operate the device only after having familiarized with its functions. Do not permit operation by persons not

qualified for operating the device. Most damages are the result of unprofessional operation!

Always store the device dry!

Always drain the tank and please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, etc.