Publicité
Les langues disponibles
Les langues disponibles
STEP 5: FINISHING STEPS
A: ATTACH WATER SUPPLY
CONNECTOR TO FILL VALVE
Twist to the right
(counterclockwise)
*Hand-tighten only.
DO NOT OVER TIGHTEN.
B:
TURN ON WATER
Check for leaks.
(Go to www.Fluidmaster.com/support
for leak solutions.)
C: WATER LEVEL
After the tank stops filling, water level should fill the tank to
roughly ½ inch below top of overflow pipe to ensure a
proper flush. (Does not need to be exact.)
**Lever Hole
Over tightening may damage fill valve or coupling nut, potentially causing flooding. Make sure
*
the float cup does not touch the tank walls or tank lever and flush valve.
**
The top of the overflow pipe must be a minimum of 1" below tank lever hole.
RIGHT
Top of
Overflow Pipe
Water Level
Overflow Pipe
TURN
COUNTER-
CLOCKWISE
1/2"
7
Publicité
