Mounting The Bracket - eufy Security Video Doorbell Battery Slim Guide De Démarrage Rapide

STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you're mounting the doorbell on a wooden surface, you don't need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The
Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Power Drill, Mounting Bracket, 15° Mounting Wedge
(Optional), Screw Packs
Phillips-Head Screwdriver
Mounting Bracket
(User provides it.)
(Attached to 15°
Mounting Wedge)
Mounting
Wall
Bracket
Without 15° Mounting Wedge
11 English
Screw Packs (Spare screws
15° Mounting
and anchors are included.)
Wedge (Optional)
Mounting Mounting
Wall
Wedge Bracket
With 15° Mounting Wedge
Mount the Video Doorbell on Surfaces Made Out of
Hard Materials
1. If you're mounting the doorbell on a surface made out of hard materials, like brick,
concrete, stucco, drill 2 holes through the Screw Hole Positioning Card with
15/64"(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the
Mounting Bracket on the wall.
What is required: Power Drill, 15/64"(6mm) Drill Bit, Mounting Bracket, 15°
Mounting Wedge (Optional), Screw Packs
Power Drill with 15/64"(6 mm) Drill Bit
1/4" (6.35mm) Drill Bit
(User provides it.)
1
1
Mounting Bracket
15° Mounting Screw Packs (Spare screws
(Attached to 15°
Wedge (Optional) and anchors are included.)
Mounting Wedge)
2
English 12
2