Control Panel; (Sj-Xp680G, Sj-Xp700G) - Sharp SJ-XP680G Mode D'emploi

Refrigerateur-congelateur
Masquer les pouces Voir aussi pour SJ-XP680G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

Control panel

Select
button
Switching
button
Enter button
Operations of useful modes
Select the mode icon.
1
Select on/off.
2
Complete the setting.
(Beep)
3
"Express cool"only
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
Operation of additional modes
Door alarm • When the refrigerator door is left open for over 1 minute,
door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after close the door.
• When you want to switch off button operation sound.
Sound
of button
operation
• When you want to turn on the additional mode, follow the same step again. (The indicator turns on.)
Note
10

(SJ-XP680G, SJ-XP700G)

Controlling temperature
Icon
Meaning
Freezer compartment
Refrigerator
compartment
Useful modes
Icon
Meaning
Extra cool
Express freezing
Express cool
Plasmacluster
Energy saving
Additional modes
Indicator
Meaning
Door alarm
Sound of button
operation
Display
(e.g. Extra cool)
Mode icon turns
on.
"Express cool"
only
(Flashing)
Summary
Default setting
-18°C
3°C
Default setting
OFF
Default setting
ON
When press
change in the order shown as below.
Flashing
(off)
Mode icon turns
off on the standby
display.
Cancel operation
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Note
• When you press one of the
buttons, all icons flash once and
show the standby display. If the
refrigerator stops because of
power failure, the modes except
for Extra cool and Express
freezing function the same way as
before at the time of re-power.
• Operation is invalid while the
freezer door is open.
• Mode icons or indicators
in operation light up on
the standby display.
When Express cool is
in operation, the icon
flashes on the standby
display.
• When there is
no operation for
approximately
1 minute, the
display returns to
the standby display automatically.
The standby display turns off if
there is no operation for another
1 minute.
button, the icons
Standby display
:
Useful modes
and
simultaneously
The indicator
and
simultaneously
The indicator
Turn-on state
Display
turns off.
turns off.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sj-xp700gSj-xe680mSj-xe700m

Table des Matières