Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46

DIODE TEST

WARNING: To avoid electric shock, do not test any diode that has voltage on it.
1
Set the function switch to
2
Insert the black test lead banana plug into the negative (-) jack (COM) and the red test lead
banana plug into the positive (+) jack (Ω).
3
Touch the test probe tips to the diode or semiconductor junction you wish to test. Note the
meter reading.
4
Reverse the probe polarity by switching probe position. Note this reading.
5
The diode or junction can be evaluated as follows:
a. If one reading shows a value and the other reading shows "1", the diode is good.
b. If both readings show "1", the device is open.
c. If both readings are very small or 0, the device is shorted.
NOTE: The value indicated in the display during the diode check is the forward voltage.
Beta 1760 B.indd 39
position.

21-05-2010 15:11:20

Publicité

Table des Matières
loading

Table des Matières