Changing The Picture Options - Samsung 5 Serie Guide De L'utilisateur

Changing the Picture Options

¦
Advanced settings
O
m → Picture → Advanced settings →
MEnU
EnTERE
(available in standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎
In PC mode, you can only make changes to
Contrast, gamma and White Balance.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
RGB Only Mode : Off
Color Space : Native
White Balance
▼
U Move E Enter R Return
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high)
■
Adjust the screen contrast.
shadow Detail : Increase the brightness of dark images.
■
✎
Disabled under PC mode.
gamma : Adjust the primary color intensity.
■
RgB Only Mode (Off / Red / green / Blue)
■
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
Color space (Auto / native)
■
available to create the image.
White Balance : Adjust the color temperature for a more
■
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-gain / g-gain / B-gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone : Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.
Dynamic
POWER
P
►
: Select the
TOOLS
:
: Displays
FAV.CH
: Adjust the range of colors
S.MODE
: Emphasize object
SLEEP
Picture Options
O
m → Picture → Picture Options →
MEnU
EnTERE
✎
In PC mode, you can only make changes to the
Tone, size and Digital noise Filter.
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Protection Time : 2 hours
INFO
U Move E Enter R Return
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
or Warm2 will be deactivated when the
Warm1
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
size : Your cable box/satellite receiver
■
P.MODE
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
MTS
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time, traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
CC
✎
nOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ◄ or ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲, ▼, ◄ or ►button to move the
picture up or down.
4. Press the EnTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the EnTERE button.
Color
►
CHLIST
P.SIZE
MEDIA.P
15
English