Standard Equipment; Tool Assembly And Inspection - RIDGID HKO-186 Manuel De L'opérateur

HKO-186/1810, FKO-186/1810 Hydraulic Knockout Sets
"
3 45 /
64
"
/ Dia.
3
16
Hydraulic Foot Pump
5 1
Hydraulic Ram

Standard Equipment

Model No. Description
HKO-186 1 / - 2" Hydraulic Kit w/Hand Pump
2
Includes:
• H-18 Hand Pump
• Hydraulic Cylinder
• 3 ft. Hose
• 1 / - 2" Pump/Die Sets
2
HKO-1810 1 / - 4" Hydraulic Kit w/Hand Pump
2
Includes:
• H-18 Hand Pump
• Hydraulic Cylinder
• 3 ft. Hose
• 1 / - 4" Pump/Die Sets
2
4
"
15 3 /
8
6
"
/
2
"
2 7 /
8
FKO-186
"
4 /
3
4
FKO-1810
"
1 /
8

Tool Assembly and Inspection

To prevent serious injury, proper assembly and
inspection of the Hydraulic Knockout Sets is
required. Inspection procedures should be per-
formed before each use
Assembly
1. Clean all the areas around the oil port of the pump
and ram. Inspect all threads for signs of wear or
damage and replace as needed. Clean all hose
ends, couplers and union ends. Remove the thread
protector (if so equipped) from the hydraulic oil outlet.
2. Connect the hose half coupler at the end of the hose
to the ram half coupler on the cylinder. Turn the col-
lar completely on hand-tight (Figure 1).
Figure 1 – Hydraulic Connections
Ridge Tool Company
1 / - 2" Hydraulic Kit w/Foot Pump
2
Includes:
• HF-18 Foot Pump
• Hydraulic Cylinder
• 10 ft. Hose
• 1 / - 2" Pump/Die Sets
2
1 / - 4" Hydraulic Kit w/Foot Pump
2
Includes:
• FF-18 Foot Pump
• Hydraulic Cylinder
• 10 ft. Hose
• 1 / - 4" Pump/Die Sets
2
WARNING
Ram Half
Coupler
Hose Half
Coupler