Product Overview; Wall Installation - Klarstein VINARIUM Mode D'emploi

EN
16

PRODUCT OVERVIEW

1 Ream Cover
2 Light
3 Fan Mask
4 Shelf
5 Light Switch

WALL INSTALLATION

The wall to fix the unit must be reinforced concrete wall or the wall which can bear the
weight of the Wall- hanging unit. The place to fix the unit should be close to electricity
outlet which is convenient to plug the power cord.
1
6 Temperature Control Panel
7 Temperature Display
8 Magnetic Seal
9 Glass
10 Door Frame
Use the Percussion drill to drill 3 holes with
a diameter of 6 mm in the wall, the depth
of the holes Is about 30 mm, the distance
between each hole is about 160 mm. (It is
recommended to put the Wall Bracket In the
wall to mark the position of the Installed holes
before drill.)