Publicité
Les langues disponibles
Les langues disponibles
Wiring with
dry contact
Wiring with
IR contact
Wiring with
Digital
Network
Commissioning
The ILT actuator is delivered without pre set end limit. A specific setting tool is
needed to adjust the end limit.
Check polarity
Connect the setting tool to the actuator
with the phone cable.
The LED lights on.
Put the selector upward.
Press the UP or DOWN push button of
the setting tool to check polarity.
If the direction is wrong, press the STOP
button more than 2 seconds.
6
10m
10m
1.5m
Copyright © 2009 Somfy SAS. All rights reserved - V0 - 12/2009
10m
10m
BIU-2ILT
10m
10m
1.5m
Publicité
