Publicité
Les langues disponibles
Les langues disponibles
OP 1418
3/8" D. BUTTERFLY IMPACT WRENCH KIT
TECHNICAL DATAS
Square Drive: 3/8" (10 mm)
Free Speed: 10,000 RPM
Maximum Torque: 75 ft-lbs (101 Nm)
Working Torque Range: 5~50 ft-lbs (7~68 Nm)
Air Inlet: 1/4"
Hose Size: 3/8" I.D. (10 mm)
Air Pressure: 90 P.S.I. (6.2 Bar)
Average Air Consumption: 3 CFM (85 L/Min)
Lenght: 140mm
Weight: 1kg
Vibrations: 13,4m/s
2
Sound level: 110dB
SAFETY
READ, UNDERSTAND AND KEEP THESE INSTRUCTIONS
WARNING
Failure to follow all instructions listed below may result in serious injury.
Work area hazard & personal safety
1. Keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres, such as in the presence of combustible liquid, gases or
dust. Power tool create sparks which may kindle the dust or fumes.
3. Disconnect tool before performing service or when not in use.
4. High sound levels can cause permanent hearing loss. Use hearing protection during operation.
5. Maintain a balanced body position and secure footing.
6. Slip/Trip/Fall is a major cause of serious injury or death. Be aware of excess hose left on the walking or work
ground.
7. Repetitive work motions, awkward positions and exposure to vibration can be harmful to hands and arms. If
numbness, tingling, pain or whitening of the skin occurs, stop using the tool and consult a physician.
8. Always wear impact-resistant eye and face protection when operating the tool or near the operation, repairing,
maintaining the tool or changing accessories on the tool.
Publicité
