Loading Tips and Suggestions
Your beverage center is equipped with a cantilever shelf
system which provides maximum adjust ability and custom-
izing of the shelving arrangements listed below.
Beverage center:
24" (61 cm) Wide Models:
Shown with a glass door. Figure 14.
(2) perforated metal
cantilever shelves.
(See Figure 15).
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the beverage center. Grasp the shelf
front with both hands, rotate the front upward and lift out.
(See Figure 16). To install a shelf insert the shelf in the ap-
pliance and insert the top hooks into the shelf support slots
and drop the shelf down so the hooks drop over the bottom
of the slots.
CAUTION
!
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
CAUTION
!
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
All manuals and user guides at all-guides.com
SHELVING CONFIGURATIONS
Figure14
11
Figure 15
Perforated metal shelf
Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 16a
Shelf support
slot
Figure 16